If this is your first time hiring a mini excavator, then it might seem daunting at first. With that said, there are a couple of things you should know before hiring a mini excavator. Without waiting, let us explore the list of things that you should know before hiring a mini excavator.
Read on to learn more.
Understand the Basic Controls
Firstly, you climb into the excavator and strap yourself in because safety always comes first. You might want to preheat the machine by turning it on. The display will turn on, too. You will find a throttle, which can be pulled down to give the excavator full power. The best way to get used to maneuvering a mini excavator is practice and repetition.
When it comes to practicing maneuverability, you should use the lever to pull the blade up and down. While you are at it, also practice changing the angle of the bucket. Practice rotating the digger along with raising and lowering the arm.
You Might Have to Refuel
Despite the fact that a mini excavator hire comes with a full tank of fuel, you still might have to refuel it. It comes down to the usage. The more you use it, the sooner the fuel will start to run low. To refuel the mini excavator that you hire, you might have to go to the nearest hire base to pick up some fuel. You might want to use the key to access the fuel tank.
Common Problems and Solutions
You should be prepared to deal with common problems that you might run into. You should also know how to effectively mitigate the problems.
Be Careful when Driving on Soft Ground
Despite the fact that a mini excavator is smaller and lightweight compared to a traditional excavator, it is still a big, heavy machine. So, if you drive the mini excavator on a grassy area, such as the lawn, it will destroy it. However, if you really have to drive over soft ground, such as grass, then you should use some old carpets to limit the damage.
Avoid Overheating Problems
When working the excavator quite hard, such as moving loads of dirt, you might find the tendency for the mini excavator to overheat. Now, the best way to solve this potential problem is to wait for a few minutes, let the machine cool down, and run it on low revs for a little bit when you restart it. This way, you will preserve the equipment and allow the machine engine to cool down before resuming work.
Maintain Good Balance
When you are digging with the excavator, you should know that the machine will have a tendency to tilt. To help minimize the tilt and balance the digger, you might want to lower the blade to the floor and add another secure point of contact. Also, when driving the excavator, you should keep the arm of the bucket close to the cab, as it will help you distribute the weight of the equipment evenly and thus prevent tilting.
At the time of driving uphill, make sure that the arm and bucket are extended out, as this will help you balance the machine.
Also Read-Carrectly Auto Care: Premium Car Services on Your Terms
